Rapid Prototyping Functional prototypes in engineering resins and nylon, quoted in one business day. Reverse Engineering Scan the part, rebuild the CAD you own, make the replacement. Obsolete parts included. Additive Manufacturing End use and low volume parts on Form 4B SLA and Fuse SLS, with the data sheet on every job. Design Services, Jigs and Fixtures Engineering design, fixture design and fixture manufacturing for your line.
Capabilities & Technology The three machines, what each is for, and the scanner capability grid. 3D Scanning & Inspection CAD-to-scan deviation, wear reports and first article checks on the MetroY Ultra. SLA 3D Printing Fine-feature resin parts, biocompatible resins included, on the Form 4B. SLS 3D Printing Support-free nylon parts for end use and short runs on the Formlabs Fuse. Materials Twelve engineering material families across SLA and SLS, chosen by failure mode. SLA vs SLS Guide Which process for your part, and the tolerances to expect from each.
All Industries What engineers in each sector actually send us, routed to the right service. Medical & Pharma Fixtures, gauges and biocompatible parts with the paperwork a regulated plant needs. Dental Surgical guides, models and splints on biocompatible resins, printed to your validation. Aerospace Test articles, tooling and mounts in flame retardant and high-temp materials, verified by scan. Electronics Custom enclosures, ESD-safe carriers and harness boards from your board file. Machine & Job Shops The scan and CAD department, and the parts you cannot cut, under your name. Scan to CAD Engineering drawings and solids for parts that have no documentation.
Who we are An engineering shop, not a printing service. The people, the services and the divisions to come. Quality & Documentation Part numbering, revision control, traceability and the dimensional record on every job. Inquire now & contact Send a photo or a CAD file and get a written quote in one business day.
EN ES
Inquire now

Home / Dental

For labs, clinics and device makers

Dental 3D printing on biocompatible resins.

3D printed dental models and surgical guides only help a lab when they come off the printer to the file it validated, in the resin it validated, with a record that says so. CETS prints to your workflow on the Form 4B and sends the material data sheet and the print record with every case.

Inquire now Call now
BioMed and dental resins on the Form 4B25 micron layersData sheet and print record with every caseQuotes in 1 business day

Built for labs and clinics

What travels with every case.

Material data sheet

The published Formlabs technical data sheet for the exact resin used, including the biocompatibility documentation Formlabs publishes for it.

Print record

Resin and lot, layer height, orientation, wash and post-cure cycle, written down for every case so your file has what an audit asks for.

Your file, your parameters

We print the STL you send at the settings your workflow validated. Nothing in the geometry changes without your written approval.

Overflow capacity

Send the cases your own printers cannot take this week. Quoted in one business day, typically shipped in 3 to 5 working days.

CETS supplies 3D printed dental models, surgical guides, aligner and thermoforming models, occlusal splints, try-ins and custom trays to dental laboratories, clinics and dental device makers, printed on the Form 4B in BioMed and dental resins at 25 micron layers. Files come from your intraoral scanner or design software as STL or OBJ; parts go back with the material data sheet and a print record, in English or Spanish.

For a dental laboratory in Puerto Rico that needs overflow capacity or a second printer, CETS prints your validated file on the Form 4B and returns the models with the resin data sheet and the print record.

What we make

For labs and clinics like yours.

  • Dental models: working models, dies and full arches from intraoral scan data
  • 3D printed surgical guides for implant placement, to your planned sleeve positions
  • Aligner and thermoforming models, hollowed and based to your template
  • Occlusal splints and night guards in the resin your workflow validated
  • Try-ins and custom impression trays
  • Implant analog models with the analog seats printed in
Printed dental and medical parts, including a surgical guide, on a blue background
Hardware and materials

Form 4B, BioMed and dental resins, 25 micron layers.

Dental work runs on the Form 4B, in the BioMed resins and in the Formlabs dental resin line for models, guides and splints. Layer height is set to your workflow, down to 25 microns where the case needs it.

  • BioMed Clear and BioMed Durable for skin and tissue contact applications
  • Dental resins for models, surgical guides, splints and trays
  • Wash and post-cure run to the resin manufacturer's published settings, or to yours
SLA on the Form 4B Biocompatible resins
Gloved hands holding a clear printed part beside a yellow instrument

Your validation

Printed to your validation, stated plainly.

CETS prints to the workflow your lab or clinic validated: your file, your resin, your layer height, your wash and post-cure cycle. Where you have no preference we print to the resin manufacturer's published settings and say so on the print record. That is the whole scope of dental 3D printing at CETS: the part, made to your instructions, with the paper that proves it.

The clinical determination for any appliance, and any regulatory status attached to it, belong to the dentist, the laboratory or the device maker who places or supplies it. CETS supplies the printed part, the material data sheet and the print record they need to make that determination.

How we document regulated work

Formlabs customer material

The same platform dental labs already run.

Formlabs documents dental applications of the Form 4B and its resins in its own customer stories: surgical guides, models and splints printed in dental laboratories and clinics. The card here is Formlabs customer material, shown so you can see the workflow CETS prints to. It is not CETS work.

A Form 4B resin printer on a bench
Formlabs customer material · Dental

Surgical guides and models printed in the lab, on the Form 4B

Biocompatible and dental resins, 25 micron layers, printed from intraoral scan data to the lab's own workflow.

CETS serves Puerto Rico and the US mainland, with international service available.

Puerto Rico US mainland International

FAQ

Common questions

How fast can you turn a dental case?

Quotes go out in one business day. Models, guides and splints typically ship in 3 to 5 working days from an approved file. Tell us the seat date and the number of arches when you send the case and we plan the print to it.

What file formats do you accept?

STL and OBJ exports from intraoral scanners and dental design software, and PLY where that is what your scanner writes. Send the file as designed, with the base, hollowing and drill sleeve positions already in it. We print the geometry you send and do not alter it without your written approval.

Which resin will you use for my case?

The one your workflow validated. If you have not chosen, we recommend from the BioMed and dental resin families by application, send the technical data sheet with the quote, and record the resin and its lot on the print record so the choice is documented for your file.

Who is responsible for the clinical use of a printed appliance?

The dentist, laboratory or device maker who places or supplies it. CETS prints to your validated file and workflow and provides the material data sheet and the print record. The clinical determination, and any regulatory status attached to the appliance, stay with you.

Related pages

Medical & Pharma

Fixtures, gauges and biocompatible parts with the paperwork a regulated plant needs.

Read more

SLA 3D Printing

Fine-feature resin parts, biocompatible resins included, on the Form 4B.

Read more

Materials

Twelve engineering material families across SLA and SLS, chosen by failure mode.

Read more

Send the case your printers cannot take this week.

Attach the STL, name the resin your workflow validated, and give us the seat date. We answer in Spanish or English within one business day.

Inquire now Call now

Inquire now

Send us a plan. We’ll 3D print it for you.

A drawing, a CAD file or a photo of the part is enough to start. We reply with a written quote in one business day.

Prefer to talk? (787) 000-0000 · hola@cetsllcpr.com

We reply within one business day.