Design and build under one roof
Design/build and reverse-engineer/build in the same shop, so nothing waits on a second vendor between the drawing and the part.
Precision manufacturing and engineering design under one roof: rapid prototyping, reverse engineering, additive manufacturing and fixture design. A photo is enough to get a quote in one business day.
Why engineers send us the part
One shop that designs the part, reverse engineers the part, and builds the part. That is what makes the turnaround short.
Design/build and reverse-engineer/build in the same shop, so nothing waits on a second vendor between the drawing and the part.
Quotes in one business day and prototypes in three to five. Every quote carries a committed date, not an estimate.
Tough, rigid, high temperature and biocompatible resins, plus nylon and carbon filled nylon. Each one ships with its published data sheet.
Quotes, drawings and calls in Spanish or English, for Puerto Rico, the US mainland and international customers.
CETS is a Puerto Rico precision manufacturing and engineering design shop serving manufacturing engineers, process engineers, design engineers and tool and die makers. We handle rapid prototyping, reverse engineering services, additive manufacturing in engineering materials, and fixture design and fixture manufacturing for medical device, pharmaceutical, dental, aerospace, electronics and general job shop customers. For anyone comparing manufacturing in Puerto Rico, the difference is one roof: the part is designed, checked and built by the same engineers.
Looking for 3D printing in Puerto Rico for a real part, not a hobby print? CETS offers professional 3D printing services on Formlabs SLA and SLS systems, with engineering review before the print and a scan check after it, for plants, shops and engineers across the island and the US mainland.
How it works
Many shops do one half of this: design without build, or build without design. CETS runs the whole loop, which is why a broken part and a napkin sketch are the same job to us.
Inquire nowA photo, a STEP file, or the physical sample. We model it, or review your model, and quote it in one business day.
Formlabs SLA for detail, fine features and biocompatible work, or SLS nylon for tough parts that go straight into service.
Washed, cured, finished, and measured against the model. Critical dimensions are recorded in writing, not eyeballed.
The finished part, the CAD you own, and the inspection record. Reorders run from the same file at the same dimensions.
Technology
Two Formlabs printers and one blue-light scanner. Every material we quote comes with a technical data sheet your engineers can read before they approve anything, and every finished part can be measured against its model.

Resin printing for fine features, tight fits and biocompatible parts, with the data sheet on every material.
SLA 3D printing
Support-free nylon and carbon filled nylon for end use parts, fixtures and short production runs.
SLS 3D printing
Blue-light scanner for reverse engineering, CAD-to-scan deviation reports and first article checks.
3D scanning and inspectionOur services
Start from a CAD file, a broken sample, or a problem on the line. Each one ends the same way: a finished, measured part on your bench.
Hold the geometry before you spend on tooling. Functional prototypes in engineering resins and nylon, usually in three to five days.
The OEM discontinued it and the drawing is gone. Bring the sample, even broken. We scan it, rebuild the CAD and make the replacement.
Production runs in engineering materials on Formlabs SLA and SLS. Tens or hundreds, same file, same dimensions, published data sheets.
Engineering design services, fixture design and fixture manufacturing. The tooling no catalog sells, because only your line needs it.
Puerto Rico runs one of the densest medical device and pharmaceutical clusters in the world. CETS makes the fixtures, gauges and replacement parts those plants need, and the guides, models and splints dental practices order, in materials that come with a data sheet.
Engineering materials
Every material below is a Formlabs material with a published technical data sheet. We send it with the quote so your quality group sees the numbers, not our description of them.
Full material list| Material | Process | Typical use |
|---|---|---|
| Tough 2000 | SLA | Snap fits, housings, stiff prototypes |
| Rigid 10K | SLA | Fixtures under load, gauges |
| High Temp | SLA | Parts near heat, autoclave trials |
| BioMed Clear | SLA | Biocompatible, skin and tissue contact |
| Nylon 12 | SLS | End use parts, no supports needed |
| Nylon 11 CF | SLS | Stiff, light metal bracket replacements |
What these machines produce
Manufacturers use the Formlabs Form 4B and Fuse platform for line tooling, obsolete spares and design iteration. These are Formlabs customer stories, shared with permission, produced on the same systems that run in our shop.

Centering blocks and manufacturing aids in Nylon 12 on the Fuse.

SLA and SLS prototypes through design iteration.

Reverse engineered replacements for rolling stock maintenance.
CETS serves Puerto Rico and the US mainland, with international service available.
FAQ
A photo from your phone and a rough size is enough to start. A STEP or native CAD file gets you a tighter number faster. If you have the physical part, even broken, we can collect it in Puerto Rico or you can ship it from anywhere.
Quotes go out within one business day. Rapid prototyping usually takes three to five working days. Reverse engineering from a sample is typically five to ten working days to an approved first article. Every quote carries its own committed date.
Formlabs engineering resins (Tough, Rigid, High Temp, Clear and BioMed) on SLA, plus Nylon 12 and carbon filled Nylon 11 CF on SLS. Every material has a published technical data sheet, which we send with the quote.
Yes. CETS serves Puerto Rico and the US mainland, with international service available. Files can be sent from anywhere, and finished parts ship by freight with the inspection record and the CAD.
Yes. CETS makes fixtures, gauges, trays, guides and replacement parts for regulated plants and dental practices, in materials that carry documentation, and supplies a written dimensional record with every job. The regulatory determination for your product stays with your quality team.
You do. Every part CETS designs or reverse engineers leaves with its STEP and native files, so you can reorder or revise it anywhere.
A written quote with the material, the tolerance and the date, in one business day.
Inquire now
A drawing, a CAD file or a photo of the part is enough to start. We reply with a written quote in one business day.
Prefer to talk? (787) 000-0000 · info@cetsllcpr.com